GVP MCP:mpc:amr-fmtp
| (7 intermediate revisions by 3 users not shown) | |||
| Line 2: | Line 2: | ||
|hidden=false | |hidden=false | ||
|default=octet-align=0 | octet-align=1 | |default=octet-align=0 | octet-align=1 | ||
| − | |valid=<parameter=value>[|<parameter=value> | + | |valid=<parameter=value>[|<parameter=value>]* |
|takeseffect=At start/restart | |takeseffect=At start/restart | ||
| − | |shortdesc=Specifies the AMR SDP RTP payload configurations offered and accepted by the MCP. Set to one or more fmtp text values separated by the '|' character. The fmtp text is the same as would appear in the SDP negotiation (see RFC 4867). Each "|" separated value configures an AMR payload type. There are two fmtp parameters that can be set for each payload type, octet-align and mode-set. <br /><br /> Setting octet-align=0 or octet-align=1 disables or enables octet align mode for the payload. <br /><br /> Setting mode-set restricts the AMR modes for the payload. For example, setting "mode-set=0,1" only allows modes 0 and 1. If mode-set is not set, all modes are allowed unless the mode-set is restricted by the remote end. Valid modes are inclusively 0 to 7. <br /><br /> For example, setting this parameter to "octet-align=1" enables one payload type with octet aligned mode enabled and any mode allowed, and setting it to "octet-align=0 | octet-align=1" enables two payload types, one with bandwidth efficient mode enabled and any mode allowed, and one with octet aligned enabled and any mode allowed. <br /><br /> Note, the mode-set parameter can cause transcoding to be required. For example, if a prompt to be played is in AMR format mode 5, but only mode 0 is allowed in the payload, a transcoder will be invoked to transcode from AMR mode 5 to AMR mode 0. <br /><br /> Some AMR implementations may specify a fmtp options that are not actually activated for the payload. To work around this, the mpc.amr.fmtp can be set to "*". For this setting, all fmtp content in an SDP offer will be ignored and "octet-align=0" will be returned in the SDP answer. Similarly, an offer for this configuration will be set to "octet-align=0", and all fmtp content in the answer will be ignored. | + | |shortdesc= |
| + | |||
| + | Specifies the AMR SDP RTP payload configurations offered and accepted by the MCP. | ||
| + | Set to one or more fmtp text values separated by the '|' character. | ||
| + | The fmtp text is the same as would appear in the SDP negotiation (see RFC 4867). | ||
| + | Each "|" separated value configures an AMR payload type. There are two fmtp parameters | ||
| + | that can be set for each payload type, octet-align and mode-set. | ||
| + | <br /><br /> Setting octet-align=0 or octet-align=1 disables or enables octet align | ||
| + | mode for the payload. | ||
| + | <br /><br /> Setting mode-set restricts the AMR modes for the payload. For example, | ||
| + | setting "mode-set=0,1" only allows modes 0 and 1. If mode-set is not set, all modes are | ||
| + | allowed unless the mode-set is restricted by the remote end. Valid modes are inclusively 0 to 7. | ||
| + | <br /><br /> For example, setting this parameter to "octet-align=1" enables one payload type | ||
| + | with octet aligned mode enabled and any mode allowed, and setting it to | ||
| + | "octet-align=0 | octet-align=1" enables two payload types, | ||
| + | one with bandwidth efficient mode enabled and any mode allowed, and one with octet aligned enabled | ||
| + | and any mode allowed. | ||
| + | <br /><br /> Note, the mode-set parameter can cause transcoding to be required. For example, | ||
| + | if a prompt to be played is in AMR format mode 5, but only mode 0 is allowed in the | ||
| + | payload, a transcoder will be invoked to transcode from AMR mode 5 to AMR mode 0. | ||
| + | <br /><br /> Some AMR implementations may specify a fmtp options that are not actually activated for | ||
| + | the payload. To work around this, the mpc.amr.fmtp can be set to "*". For this setting, | ||
| + | all fmtp content in an SDP offer will be ignored and "octet-align=0" will be returned in the SDP | ||
| + | answer. Similarly, an offer for this configuration will be set to "octet-align=0", and all fmtp | ||
| + | content in the answer will be ignored. | ||
| + | |||
| + | |||
}} | }} | ||
{{DraftOption}} | {{DraftOption}} | ||
Latest revision as of 14:15, December 17, 2021
View in ref guide.
Edit this option Publish this option Clear draft content
Published Option
amr.fmtp
Default Value: octet-align=0 |
Valid Values: <parameter=value>[|<parameter=value>]*
Changes Take Effect: At start/restart
Specifies the AMR SDP RTP payload configurations offered and accepted by the MCP.
Set to one or more fmtp text values separated by the '|' character.
The fmtp text is the same as would appear in the SDP negotiation (see RFC 4867).
Each "|" separated value configures an AMR payload type. There are two fmtp parameters
that can be set for each payload type, octet-align and mode-set.
Setting octet-align=0 or octet-align=1 disables or enables octet align
mode for the payload.
Setting mode-set restricts the AMR modes for the payload. For example,
setting "mode-set=0,1" only allows modes 0 and 1. If mode-set is not set, all modes are
allowed unless the mode-set is restricted by the remote end. Valid modes are inclusively 0 to 7.
For example, setting this parameter to "octet-align=1" enables one payload type
with octet aligned mode enabled and any mode allowed, and setting it to
"octet-align=0 | octet-align=1" enables two payload types,
one with bandwidth efficient mode enabled and any mode allowed, and one with octet aligned enabled
and any mode allowed.
Note, the mode-set parameter can cause transcoding to be required. For example,
if a prompt to be played is in AMR format mode 5, but only mode 0 is allowed in the
payload, a transcoder will be invoked to transcode from AMR mode 5 to AMR mode 0.
Some AMR implementations may specify a fmtp options that are not actually activated for
the payload. To work around this, the mpc.amr.fmtp can be set to "*". For this setting,
all fmtp content in an SDP offer will be ignored and "octet-align=0" will be returned in the SDP
answer. Similarly, an offer for this configuration will be set to "octet-align=0", and all fmtp
content in the answer will be ignored.
Draft Option
No draft option