ConfDeviceProfileDN

Configuring the Device Profile DN

The cluster switch can support multiple device-profile DNs (Voice over IP Service DNs of type device-profile). These DNs are used to configure the DN-level parameters that SIP Server dynamically assigns to the device participating in a call.

On the Options tab, configure the following parameters:

1. service-type—Enter device-profile.
2. profile-id—Enter a value to identify this profile. SIP Server assigns the profile to a device by matching this value to the content of the User-Agent header in the SIP message. If no device profile is found, then a default device is created (in other words, all device parameters will have default values). The value of the profile-id parameter must either match the value of the User-Agent header or it can be defined as a substring which can be found in the User-Agent header.
   

Notes:

1. • The string is case-sensitive.
   • There is no default value.
   • Changes take effect for the next call.
   • You can set the profile-id to the special value of default-profile. SIP Server uses this profile to handle any device that includes the User-Agent header in its SIP messages (and so cannot be used to match a specific device profile).

A Device Profile DN, set to the default-profile