Revision as of 20:15, January 8, 2016 by WikiAPI (talk | contribs) (Created page with "---- __NOTOC__ <!-- ==================== --> <!-- DO NOT EDIT --> =Published= {{Optionstmp |internalformid=1 (DO NOT EDIT THIS VALUE) |fromxml=true |docstatus=Published...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

GVP MCP:mpc:videotranscoder-h264-resolutions


Published

videotranscoder.h264.resolutions

Default value: SQCIF QCIF QVGA CIF VGA 4CIF SVGA 720P
Valid Values:
Changes Take Effect: At start/restart


This parameter specifies the list of H264 encodable resolutions when H264 transcoding is applied. If empty, defaults to "SQCIF QCIF QVGA CIF VGA 4CIF SVGA 720P". ITU-T H264 Recommendation document Table A.6 specifies the list of resolution/frame rate/bit rate limits per level. If the resolution needs to be downscaled because of the level requirement, the resolution closest downward in this list will be selected. Format: <resolution> <resolution> [<resolution> ...] Where <resolution> is <width>x<height> or one of the following keywords - SQCIF - Sub-QCIF resolution (128x96) QCIF - QCIF resolution (176x144) QVGA - QVGA resolution (320x240) CIF - CIF resolution (352x288) VGA - VGA resolution (640x480) 4CIF - 4CIF resolution (704x576) SVGA - SVGA resolution (800x600) 720P - 720P HD resolution (1280x720) When <width>x<height> syntax is used, the resolution must be less than or equal to 720P HD resolution. WARNING: MCP will fail to start if invalid resolution is specified.


Extended Description

Draft

Default value:
Valid Values:
Changes Take Effect:




Extended Description

Comments or questions about this documentation? Contact us for support!