Start SIP Feature Server

To start and verify SIP Feature Server:

Warning

Do not start Feature Server until you have set the configuration options replicationStrategyClassName and replicationOptions. See Cassandra options.

1. To run Feature Server in secure (https) mode:
   • Open the start.ini file and uncomment etc/jetty-ssl.xml
   • In the IVR Profile, set initial-page-url = https://Feature Server IP address or host name:8443/fs
2. Use Genesys Administrator, not the command line, to start SIP Feature Server. If you are running more than one Feature Server, start the Master first.
3. In Genesys Administrator, verify that the Feature Server is running.
4. Verify that the GAX interface is running by logging in as the Default administrator (in other words, the Default user in Configuration Server):

   GAX IP address:port/gax

5. At this point, only the Default administrator can log into the Feature Server GAX interface. To enable other users to log in as administrators, assign the Administrator role to them.

Configure Jetty version 9 for Feature Server

This section provides detailed information about Jetty version 9 configuration files.

HTTP Configuration

• In the command section of the launcher.xml file, add:

  jetty.port=8080

• Comment default value for http port. Default value should be used from launcher.xml file:

  ## HTTP port to listen on

  #jetty.port=8080

HTTPS Configuration

• In the command section of the launcher.xml file, add:

  https.port=8443

• To enable https module, add the following to start.ini file:

  # Module: https

  --module=https

• To add HTTPS idle timeout:

  # HTTPS idle timeout in milliseconds

  https.timeout=30000

• To enable ssl module:

  # Module: ssl

  --module=ssl

• To specify keystore and truststore:

  ## Set up a demonstration keystore and truststore

  jetty.keystore=etc/keystore

  jetty.truststore=etc/keystore

• To specify passwords for keystore, keymanager, and truststore:

  File $FS_HOME/start.ini contains Secure Password Obfuscation for:

  jetty.keystore.password=OBF:1f2o1x0r1z0f1z0f1x1v1f1q

  jetty.keymanager.password=OBF:1f2o1x0r1z0f1z0f1x1v1f1q

  jetty.truststore.password=OBF:1f2o1x0r1z0f1z0f1x1v1f1q

• Configuration certificates in Jetty version 9
  • Configuring SSL
  • Configuring Jetty SslContextFactory
  • Generating a CSR with keytool
  • Loading Keys and Certificates via PKCS12