Configuring SIP Server Applications

[+] On the Server Info Tab

For each SIP Server instance in the cluster node, you must configure listening ports for the T-Controller and Interaction Proxy modules:

1. Create a new port for T-Controller. Click Add Port and assign the following information:
   • ID — TCPort
     
   • Listening Port — Enter an available port number.
   • Connection Protocol — Enter TController as the protocol.
2. Create a new port for Interaction Proxy.
   • ID — IPport
   • Listening Port — Enter an available port number.
   • Connection Protocol — Enter IProxy as the protocol.

Note: All names are case-sensitive.

[+] On the Options Tab

For each SIP Server instance in the cluster node, configure the following options:

• geo-location — Enter a string identifying the Data Center to which this SIP Server instance belongs.
  Important: This parameter must be defined for SIP Server to work properly in cluster mode. All applications deployed in the same data center use the same value for this geo-location parameter.
• sip-address — This existing SIP Server option is mandatory in cluster mode. SIP Server uses this parameter to build the Via and Contact headers in SIP messages.
• sip-outbound-proxy — Set this option to true.
• sip-enable-gdns — Set this option to true.
• sip-enable-rfc3263 — Set this option to true.
• gdns-verbose-level — In the Log section, set this option to 4 to enable GDNS logs. This is an optional parameter, used to troubleshoot DNS-related scenarios.
• sip-link-type — Set this option to 3.
• server-role — Set this option to 5.
• msml-support — Set this option to true. This enables msml for integration with GVP media services.
• dial-plan — Set this option to the name of the Dial Plan DN (Voice over IP Server DN with service-type set to dial-plan to be used by this SIP Server application.