Contents
Default SipEndpoint.config Settings
Using the Default Configuration File
You can find the default configuration file in the following location:
<installation folder>/Configuration/SipEndpoint.config
This file contains XML configuration details that affect how your SIP Endpoint SDK application behaves. The inital settings are the same as those specified for use with the QuickStart application that is included with your SIP Endpoint SDK release.
Configuration settings are separated into two containers: the Basic Container holds the connectivity details that are required to connect to your SIP Server, while the Genesys Container holds a variety of configuration settings.
Basic Container
The first Container ("Basic") holds the basic connectivity details that are required to connect to your SIP Server. This container has at least one connection (Connectivity) element with the following attributes:
<Connectivity user="DN" server="SERVER:PORT" protocol="TRANSPORT"/>
If you are using a configuration that supports Disaster Recovery and Geo-Redundancy, there may be multiple connection elements present with each specifying a separate possible connection. Refer to the configuration settings of that feature for details. You will have to make the following changes and save the updated configuration file before using the SIP Endpoint SDK:
- user="DN" — Supply a valid DN for the user attribute.
- server="SERVER:PORT" — Replace SERVER with the host name where your SIP Server is deployed, and PORT with the SIP port of the SIP Server host. (The default SIP port value is 5060.)
- protocol="TRANSPORT" — Set the protocol attribute to reflect the protocol being used to communicate with SIP Server. Possible values are UDP, TCP, or TLS.
Genesys Container
The second Container ("Genesys") holds a number of configurable settings that are organized into domains and sections. These settings do not have to be changed, but can be customized to take full control over your SIP Endpoint SDK applications.
An overview of the settings in this container and the valid values for these settings is provided here:
| Section | Setting | Values | Description |
|---|---|---|---|
| codecs — See Working with Codec Priorities | |||
| device | |||
| audio_in_device | String | Microphone device name | |
| audio_out_device | String | Speaker device name | |
| headset_name | String | The name of the headset model | |
| manual_audio_devices_configure | Number | Valid values: 0 or 1. The setting is active if use_headset=0. Enables configuration of the preferred input and output devices that are set in audio_in_device and audio_out_device. | |
| use_headset | Number | Valid values: 0 or 1. If set to 1, the SDK uses a headset as the preferred audio input and output device. | |
| diagnostics | |||
| enable_logging | Number | Valid values: 0 or 1. Disable or enable logging. | |
| log_file | String | Log file name, for example, SipEndpoint.log | |
| log_level | Valid values: 0 – 4. Log levels: 0 = "Fatal"; 1 = "Error"; 2 = "Warning"; 3 = "Info"; 4 = "Debug". | ||
| log_options_provider | String | Valid values for webrtc = (warning, state, api, debug, info, error, critical). For example: gsip=2, webrtc=(error,critical) | |
| logger_type | file | If set to file, the log data will be printed to the file specified by the log_file parameter. | |
| endpoint | |||
| audio_qos | Number | The integer value representing the DSCP bits to set for RTP audio packets. Note: QoS is not supported for Windows Vista, Windows 7, or higher. | |
| include_os_version_in_user_agent_header | Number | If set to 1, the user agent field includes the OS version the client is currently running on. Default: 0. | |
| ip_versions | IPv4
IPv6 |
A value of IPv4 means that the application selects an available local IPv4 address; IPv6 addresses are ignored.
A value of IPv6 means that the application selects an available local IPv6 address; IPv4 addresses are ignored. | |
| public_address | String | Local IP address or Fully Qualified Domain Name (FQDN) of the machine. | |
| rtp_inactivity_timeout | Number | Timeout interval for RTP inactivity. Valid values are integers from 0 to 150. A value of 0 or values greater than 150 mean that this feature is not activated. A value in the range of 1 to 150 indicates the inactivity timeout interval in seconds. Default: 0. | |
| rtp_port_min | Number | The integer value representing the minimum value for an RTP port range. Must be within the valid port range of 9000 to 65535. If the minimum and maximum values are not specified or are set to an invalid value, the default minimum (9000) and maximum (minimum value + 999) are used. Setting the minimum to a value that is larger than the maximum is considered an error and will result in a failure to initialize the endpoint. | |
| rtp_port_max | Number | The integer value representing the maximum value for an RTP port range. Must be within the valid port range of 9000 to 65535. If the minimum and maximum values are not specified or are set to an invalid value, the default minimum (9000) and maximum (minimum value + 999) are used. Setting the maximum to a value that is less than the minimum is considered an error and will result in a failure to initialize the endpoint. | |
| signaling_qos | Number | The integer value representing the DSCP bits to set for SIP packets. Note: QoS is not supported for Windows Vista, Windows 7, or higher. | |
| sip_port_min | Number | The integer value representing the minimum value for a SIP port range. Must be within the valid port range of 1 to 65535. If the minimum and maximum values are not specified or are set to an invalid value, the default minimum (5060) and maximum (minimum value + 6) are used. Setting the minimum to a value that is larger than the maximum is considered an error and will result in a failure to initialize the endpoint. | |
| sip_port_max | Number | The integer value representing the maximum value for a SIP port range. Must be within the valid port range of 1 to 65535. If the minimum and maximum values are not specified or are set to an invalid value, the default minimum (5060) and maximum (minimum value + 6) are used. Setting the maximum to a value that is less than the minimum is considered an error and will result in a failure to initialize the endpoint. | |
| video_qos | Number | The integer value representing the DSCP bits to set for RTP Video packets. Note: QoS is not supported for Windows Vista, Windows 7, or higher. | |
| vq_report_collector | See Producing RTCP Extended Reports | ||
| vq_report_publish | See Producing RTCP Extended Reports | ||
| mailbox | |||
| password | String | Mailbox password | |
| server | String | Proxy server address and port for this mailbox | |
| timeout | Number | Registration timeout interval | |
| transport | udp
tcp |
Transport protocol to use when communicating with server | |
| user | String | User ID for this mailbox | |
| nat | |||
| ice_enabled | Boolean | Enable or disable ICE | |
| stun_server | String | STUN server address. An empty or null value indicates this feature is not being used. | |
| stun_server_port | String | STUN server port value | |
| turn_password | Number | Password for TURN authentication | |
| turn_relay_type | Number | Type of TURN relay | |
| turn_server | String | TURN server address. An empty or null value indicates this feature is not being used. | |
| turn_server_port | String | TURN server port value | |
| turn_user_name | String | User ID for TURN authorization | |
| proxy<n> | |||
| display_name | String | Proxy display name | |
| password | String | Proxy password | |
| reg_interval | Number | The period, in seconds, after which the endpoint starts a new registration cycle when a SIP proxy is down. Valid values are integers greater than or equal to 0. If the setting is empty or negative, the default value is 0, which means no new registration cycle is allowed. If the setting is greater than 0, a new registration cycle is allowed and will start after the period specified by regInterval. | |
| reg_timeout | Number | The period, in seconds, after which registration should expire. A new REGISTER request will be sent before expiration. Valid values are integers greater than or equal to 0. If the setting is 0 or empty/null, then registration is disabled, putting the endpoint in standalone mode. | |
| security | |||
| cert_file | String | Thumbprint value of the Public endpoint certificate file, which is used as a client-side certificate for outgoing TLS connection and server-side certificate for incoming TLS connections. For example: 78 44 34 36 7a c2 22 48 bd 5c 76 6b 00 84 5d 66 83 f5 85 d5 | |
| tls_enabled | Number | If set to 1, connection with TLS transport will be registered. Default: 0. | |
| use_srtp | String
disabled
optional |
Indicates whether to use SRTP | |
| session | |||
| agc_mode | 0
1 |
If set to 0, AGC (Automatic Gain Control) is disabled; if set to 1, it is enabled. Default: 1. Other values are reserved for future extensions. This configuration is applied at startup, after which time the agc_mode setting can be changed to 1 or 0 from the main sample application.
NOTE: It is not possible to apply different AGC settings for different channels in multi-channel scenarios. | |
| auto_accept_video | Number | If set to 1, video calling is enabled and if set to 0, video calling is disabled | |
| auto_answer | Number | If set to 1, all incoming calls should be answered automatically. | |
| dtmf_method | Rfc2833
Info |
Method to send DTMF | |
| dtx_mode | Number | Valid values: 0 or 1. If set to 1, DTX is activated. | |
| reject_session_when_headset_na | Number | Valid values 0 or 1. If set to 1, the SDK should reject the incoming session if a USB headset is not available. | |
| sip_code_when_headset_na | Number | If a valid SIP error code is supplied, the SDK rejects the incoming session with the specified SIP error code if a USB headset is not available. | |
| vad_level | Number | Sets the degree of bandwidth reduction. Valid values: 0 – 3 — from 0 (conventional VAD) to 3 (aggressive high). | |
Additional Configuration Options
The default configuration file may not contain all settings that may be used with the SIP Endpoint SDK; additional settings can be added to change certain behaviors. Check Configuring SIP Endpoint SDK for .NET for a discussion of these additional settings.