Switch
Contents
statserver Section
The following options are defined on the Options tab of the Switch object in the statserver section:
position-extension-linked
Default Value: Depends on the switch type (see description)
Valid Values: yes, no
Changes Take Effect: On Stat Server start
This option is a static boolean option that can be configured for any switch.
If this option is taken into account and is set to yes (or is yes by default), then the corresponding switch is treated as the Meridian-like switch (position and extension DNs on the same place are considered linked if no more than one position/extension pair is configured on a place and agent is logged into a position DN only).
Please note that for some switches this new option is ignored (see table below).
| Switch type | Default value | Comments |
|---|---|---|
| NortelMeridian | n/a | option is ignored |
| NortelMeridianCallCenter | n/a | option is ignored |
| NortelCommunicationServer2000/2100 | n/a | option is ignored |
| CiscoCallManager | no | |
| IntecomIBX80 | yes | |
| EricssonMD110 | yes | |
| AastraMX1 | yes | |
| NEC | no | NEC switch is treated as the Meridian-like switch if any (or both) of the following options are set to true:
nec-position-extension-linked, configured on the Stat Server application, position-extension-linked, configured on the switch. |
| NECSV7000 | no | NECSV7000 switch is treated as the Meridian-like switch if any (or both) of the following options are set to true:
nec-position-extension-linked, configured on the Stat Server application, position-extension-linked, configured on the switch. |
| All other types | no |
Note 1: The Stat Server option position-extension-linked is used completely independently.
Note 2: An attempt to log in an agent on an extension DN for the Meridian-like switch causes incorrect Stat Server behavior due to pending NotReady state of this extension.
suppress-user-data
Default Value: no
Valid Values: yes, no
Changes Take Effect: Upon DN re-registration
Determines whether Stat Server should transmit call-extracted attached data to Stat Server clients for the particular DN on which the option was set or for all DNs registered on a switch. Configure this option in the [statserver] section on the Options tab of Switch and/or DN objects. See To Suppress the Transmission of Attached Data in the Stat Server Deployment Guide for more information.