Setting up your user profile

Warning

This User's Guide applies ONLY to the Legacy SIP Feature Server 8.1.200.xx release. Unless you have been told to use this documentation, use the current 8.1.2 User's Guide.

User profiles are not available for all users.

To set up or edit your user profile:

1. Log into the Feature Server User Web application (<Feature Server IP address>:8080/fs/user).
2. At the bottom of the page, click Edit.
3. Select a time zone. Select Default to use the system time zone.
4. Configure your call settings:

   Setting	Values (default value in bold)	Description
   Reject Call On Not Ready	Off, On	Rejects calls when you are not ready on a device.
   Call Waiting	On, Off	Allows incoming call even if another call is in progress.
   No Answer Timeout	30 sec, 5 to 60 seconds (in 5-second intervals)	Specifies the length of time, in seconds, that Feature Server waits for you to answer a ringing call.
   Voicemail Enabled	Yes, No	Works in combination with Call Waiting and Do Not Disturb. If Voicemail Enabled is set to off, second calls are rejected if Do Not Disturb (DND) is set and Call Waiting is set to off. If Voicemail Enabled is set to on, second calls are forwarded to voicemail if Do Not Disturb (DND) is set and Call Waiting is set to off
   Forward All Calls to	Default (Not Set), Voicemail, <dialed number>	Immediately forwards all calls to voicemail or to the specified dialed number.
   Forward On No Answer	Default (Not Set), Voicemail, <dialed number>	After the No Answer Timeout value, forwards calls to voicemail or to the specified dialed number.
   Forward On Busy	Default (Not Set), Voicemail, <dialed number>	When you are on a call, forwards calls to voicemail or to the specified dialed number.

5. Click Save changes.