fm Section
- cachemaxentrycount
- cachemaxentrysize
- cachemaxsize
- enable100continue
- http_proxy
- https_proxy
- interface
- localfile_maxage
- maxredirections
- no_cache_url_substring
- portrange
- ssl_ca_info
- ssl_ca_path
- ssl_cert
- ssl_cert_type
- ssl_cipher_list
- ssl_key
- ssl_key_password
- ssl_key_type
- ssl_random_file
- ssl_verify_host
- ssl_verify_peer
- ssl_version
cachemaxentrycount
Default Value: 1000
Valid Values: Must be an integer greater than or equal to 0.
Changes Take Effect: At start/restart
The maximum number of cache entries that can be stored in the cache.
cachemaxentrysize
Default Value: 100000
Valid Values: Must be an integer greater than or equal to 0.
Changes Take Effect: At start/restart
The maximum size of each cache entry in bytes.
cachemaxsize
Default Value: 10000000
Valid Values: Must be an integer greater than or equal to 0.
Changes Take Effect: At start/restart
The maximum total size of the cache in bytes.
enable100continue
Default Value: 0
Valid Values:
Changes Take Effect: At start/restart
Enable or disable the "Expect: 100-continue" header in HTTP 1.1 requests.
http_proxy
Default Value: localhost:3128
Valid Values:
Changes Take Effect: At start/restart
The HTTP proxy to be used for HTTP requests.
https_proxy
Default Value:
Valid Values:
Changes Take Effect: At start/restart
The HTTPS proxy to be used for HTTPS requests.
interface
Default Value:
Valid Values:
Changes Take Effect: At start/restart
This sets the network interface IP address to be used for outgoing HTTP requests. If this parameter is empty, it will automatically select the network interface to be used. If the Squid HTTP proxy is used, it has to be configured to accept HTTP requests from the interface specified. Otherwise, Squid by default would only accept HTTP requests from the localhost.
localfile_maxage
Default Value: 10
Valid Values:
Changes Take Effect: At start/restart
Maxage for cached local file in seconds. Caching of local file can be turned off by setting this to 0.
maxredirections
Default Value: 5
Valid Values: Must be an integer greater than or equal to 0, and less than 99.
Changes Take Effect: At start/restart
The maximum number of times to follow the Location: header in the HTTP response. Set to 0 to disable HTTP redirection.
no_cache_url_substring
Default Value: cgi-bin,jsp,asp,?
Valid Values:
Changes Take Effect: At start/restart
If a URL contains any one of the sub-strings in this comma-delimited list, it will not be cached.
portrange
Default Value:
Valid Values:
Changes Take Effect: At start/restart
The local port range to be used for HTTP requests. If this parameter is not specified, CCP will let the OS choose the local port.
ssl_ca_info
Default Value:
Valid Values:
Changes Take Effect: At start/restart
The file name holding one or more certificates to verify the peer with.
ssl_ca_path
Default Value:
Valid Values:
Changes Take Effect: At start/restart
The path holding multiple CA certificates to verify the peer with. The certificate directory must be prepared using the openssl c_rehash utility.
ssl_cert
Default Value:
Valid Values:
Changes Take Effect: At start/restart
The file name of your certificate. The default format is "PEM" and can be changed with the configuration parameter ssl_cert_type
ssl_cert_type
Default Value: PEM
Valid Values:
Changes Take Effect: At start/restart
The format of the certificate.
ssl_cipher_list
Default Value:
Valid Values:
Changes Take Effect: At start/restart
The list of ciphers to use for the SSL connection. The list must be syntactically correct, it consists of one or more cipher strings separated by colons. Commas or spaces are also acceptable separators but colons are normally used, , - and + can be used as operators. Valid examples of cipher lists include 'RC4-SHA', 'SHA1+DES', 'TLSv1' and 'DEFAULT'. More details about cipher lists can be found on this URL: http://www.openssl.org/docs/apps/ciphers.html.
ssl_key
Default Value:
Valid Values:
Changes Take Effect: At start/restart
The file name of the private key. The default format for the key is "PEM" and may be changed by the parameter ssl_key_type.
ssl_key_password
Default Value:
Valid Values:
Changes Take Effect: At start/restart
The password required to use the ssl_key.
ssl_key_type
Default Value: PEM
Valid Values:
Changes Take Effect: At start/restart
The format of the private key.
ssl_random_file
Default Value:
Valid Values:
Changes Take Effect: At start/restart
The path to a file which is read from to seed the random engine for SSL.
ssl_verify_host
Default Value: 0
Valid Values:
Changes Take Effect: At start/restart
Specifies how the Common name from the peer certificate should be verified during the SSL handshake
ssl_verify_peer
Default Value: 0
Valid Values:
Changes Take Effect: At start/restart
Whether or not to verify the peer's certificate. When this option is set, one of ssl_ca_info or ssl_ca_path should be set.
ssl_version
Default Value: 0
Valid Values:
Changes Take Effect: At start/restart
Set what version of SSL to attempt to use. By default, the SSL library will automatically detect the correct version. This parameter can be used to override this automatic detection, for situations where the wrong version is chosen.