IServer_Sample Section
cafile
Default Value:
Valid Values:
Changes Take Effect: After restart
The path and the filename of the certificate to be used for verifying the peer.
certificate
Default Value:
Valid Values:
Changes Take Effect: After restart
The path and the filename of the TLS certificate.
clientname
Default Value:
Valid Values:
Changes Take Effect: After restart
The IVR Group Name on the CME
enablekeepalivereq
Default Value: 0
Valid Values:
Changes Take Effect: After restart
To Enable the KeepAlive Request from IVR-SC (Heartbeat IVR-SC -> IVR-Server)
iserveraddr
Default Value:
Valid Values:
Changes Take Effect: After restart
The IP Address of the IVR Server machine
iserversocket
Default Value:
Valid Values:
Changes Take Effect: After restart
The gli_server_address port on the IVR Server. Usually the port is 9090
IVRSCClientPortRange
Default Value:
Valid Values:
Changes Take Effect: After restart
This parameter defines CTI Connector TCP port range used for communication with IVR Server. The lower and upper limit is 1030 and 65535 respectively. If value is not specified then CTI Connector will let OS choose the local port value. For example : 7775-7780
keepalivereqinterval
Default Value: 5
Valid Values:
Changes Take Effect: After restart
The KeepAlive Request Interval
keepaliveresptimeout
Default Value: 3
Valid Values:
Changes Take Effect: After restart
KeepAlive Response Timeout
key
Default Value:
Valid Values:
Changes Take Effect: After restart
The path and the filename of the TLS key to be used.
noofkeepalivereqtosendinfailurecase
Default Value: 3
Valid Values:
Changes Take Effect: After restart
Number of request to be sent to IVR-Server before being marrked as unavailable
password
Default Value:
Valid Values:
Changes Take Effect: After restart
The password associated with the certificate and key pair. Required only if key file is password protected.
secured
Default Value: false
Valid Values:
Changes Take Effect: After restart
Enable the TLS connection request from cticonnector (CTIConnector -> IVR-Server)
type
Default Value:
Valid Values:
Changes Take Effect: After restart
TLS version to used for connection.
verifydepth
Default Value: 1
Valid Values:
Changes Take Effect: After restart
This parameter sets the maximum depth for the certificate chain verification.
verifypeer
Default Value: false
Valid Values:
Changes Take Effect: After restart
This parameter turns on peer certificate verification.