mtinternal Section
enablertcp
Default Value: 0
Valid Values: Choose between: 0 or 1
Changes Take Effect: At start/restart
Specifies whether to transmit RTCP packets.
max_concurrent_savedata
Default Value: -1
Valid Values: mtinternal.max_concurrent_savedata must be an integer that is greater or equal to -1 and less than or equal to the maximum integer as defined by the Genesys Administrator Help.
Changes Take Effect: At start/restart
If specified as an integer n, and mtinternal.transmit_savedata or mtinternal.receive_savedata
is enabled, then only a maximum of n concurrent files will be open for writing data. Default
value is -1, which would place no limit.
receive_max_size
Default Value: -1
Valid Values: mtinternal.receive_max_size must be an integer that is greater or equal to -1 and less than or equal to the maximum integer as defined by the Genesys Administrator Help.
Changes Take Effect: At start/restart
Defines the maximum packet sample size that will be notified to the receiver. Note
that this number is applied to all codecs with fixed frame size. It will be rounded down
to the nearest multiple of the codec frame size. This parameter will be disabled
when variable frame size codec is used. Set to -1 to disable the limit.
receive_min_size
Default Value: -1
Valid Values: mtinternal.receive_min_size must be an integer that is greater or equal to -1 and less than or equal to the maximum integer as defined by the Genesys Administrator Help.
Changes Take Effect: At start/restart
Defines the minimum packet sample size that will be notified to the receiver. Note
that this number is applied to all codecs with fixed frame size. It will be rounded down
to the nearest multiple of the codec frame size. This parameter will be disabled
when variable frame size codec is used. Set to -1 to disable the limit.
receive_rate_alarm
Default Value: 500
Valid Values: mtinternal.receive_rate_alarm must be an integer that is greater than or equal to 0 and less than or equal to the maximum integer as defined by the Genesys Administrator Help.
Changes Take Effect: At start/restart
If greater than 0, minor alarm is generated if the transmission rate of
incoming packets is slower the real time by the specified delay in
milliseconds. This alarm will be disabled if variable frame size codec is
used for received packets.
receive_savedata
Default Value:
Valid Values: mtinternal.receive_savedata must be a valid path
Changes Take Effect: At start/restart
If specified, received data is saved under the directory.
restrictsource
Default Value: 0
Valid Values: Choose between: 0 or 1
Changes Take Effect: At start/restart
Specifies whether to allow dropping packets from other sources (filtering).
rtp.statisticsinterval
Default Value: 600000
Valid Values: Possible values are integers from 0 to 3600000 inclusive.
Changes Take Effect: At start/restart
Specifies the interval (in ms) at which statistics logging in the RTP layer will be logged. Setting this value
to 0 will disable the statistics logging. If enabled, will log when an RTP connection is destroyed, regardless of interval.
transmit_max_size
Default Value: 160
Valid Values: mtinternal.transmit_max_size must be an integer that is greater or equal to -1 and less than or equal to the maximum integer as defined by the Genesys Administrator Help.
Changes Take Effect: At start/restart
Defines the maximum data size in bytes that can be sent. Note that this number is
applied to all codecs with fixed frame size. It will be rounded down to the nearest
multiple of the codec frame size. This parameter will be disabled when variable
frame size codec is used. Set to -1 to disable the limit.
transmit_min_size
Default Value: 160
Valid Values: mtinternal.transmit_min_size must be an integer that is greater or equal to -1 and less than or equal to the maximum integer as defined by the Genesys Administrator Help.
Changes Take Effect: At start/restart
Defines the minimum data size in bytes that can be sent. Note that this number is
applied to all codecs with fixed frame size. It will be rounded down to the nearest
multiple of the codec frame size. This parameter will be disabled when variable
frame size codec is used. Set to -1 to disable the limit.
transmit_rate
Default Value: 10
Valid Values: The maximum transmission rate must be an integer that
is greater than or equal to 0 and less than or equal to the maximum
integer as defined by the Genesys Administrator Help.
Changes Take Effect: At start/restart
Specifies the transmission rate limit as a multiple of realtime. A value
of 1 means realtime, 2 means 2 times realtime and so on. Set to 0
for no limit.
transmit_rate_alarm
Default Value: 500
Valid Values: mtinternal.transmit_rate_alarm must be an integer that is greater than or equal to 0 and less than or equal to the maximum integer as defined by the Genesys Administrator Help.
Changes Take Effect: At start/restart
If greater than 0, minor alarm is generated if the transmission rate of
outgoing packets is slower the real time by the specified delay in
milliseconds. This alarm will be disabled if variable frame size codec is
used for transmitted packets.
transmit_savedata
Default Value:
Valid Values: mtinternal.transmit_savedata must be a valid path
Changes Take Effect: At start/restart
If specified, utterance is saved under the directory.